| 提交詢價信息 |
| 發布緊急求購 |
價格：電議
所在地：廣東 深圳市
型號： PH-6011
更新時間：2014-05-20
瀏覽次數：1799
公司地址：深圳市福田區華強北路華強電子世界3號樓1C042
邱先生(先生)
?
We are producing a full line of scientific and industrial measuring instruments such as pH, ORP, Temp., RH, DO, TDS and Conductivity by Bench top, Portable and Pen type of Meter, Transmitter, Controller and Calibrator.
?
We have an excellent R&D team to design new products and as customer required specifications. 90 % of our products have been exported to all over the world, and 10 % for local market. In addition, our products have also been exported to well known companies in past years such as Extech, Omega, Cole-Parmer, ATP, RS, ABB, etc., and have a good appraisal.
?
We strive to offer our products with good quality, competitive price and fast delivery. If you have any requirements regarding our products, please feel free to contact us. We are looking forward to your contact to build cooperation for mutual development.
范圍 : 0~14.0pH
度 : +/- 0.1 1 digit
解析度 : 0.1 pH
溫度補償 : 沒有
電源 : 3v x 2鋰電池CR2032
尺寸 : 33.5x170mm
重量:85g
配備﹕儀器本體, PH4&PH7標準液. 浸泡液 電池（已安裝）,螺絲起子, 使用說明
特點
1.反應速度快,測量高度
2.顯示面板 21 Ｘ 18mm, 判讀簡單容易.
3.IP-57防水級和堅固耐用的設計讓使用更便利,掉落水時可浮于水面上.
4.內附PH4&PH7校正鈕,測量更正確.
5.可自行更換電.
使用方法:
1. 取下保護蓋,幷轉出浸泡瓶,以清水清洗電并擦干,請勿倒掉浸泡液,幷于測量完畢后裝回浸泡瓶.
2. 打開電池蓋,拿出電池邊的螺絲起子,打開電源鍵.
3. 將電浸入PH7校正液,輕攪校正液并等待顯示穩定數值,顯示 7.0 如未正確,用螺絲起子調整電池右邊（ZERO）處,使顯示 7.0 即為PH7校正完成.
4. 以清水清洗電并擦干,將電浸入PH4校正液中,輕攪校正液并等待顯示穩定數值.顯示4.0,如未正確,用螺絲起子調整電池左邊（SPAN）處,使顯示 4.0 即PH4校正成.
5. 校正一定先校正PH7再校正PH4
6. 清洗電頭擦干,將電浸入待測溶液中,輕輕攪拌.并等待顯示穩定數值,即為待測液PH值,不需每次使用都校正,使用10次或2星期,校正一次即可.
7. 顯示區字幕閃爍時,應立即更換新電池.
詢價及產品技術咨詢（請勿留言），
請電：邱生 ，或電郵咨詢：
免責聲明：以上所展示的[ PH-6011 防水型PH筆 筆形PH計]信息由會員[臺灣高極（水質測試品）深圳經營部]自行提供，內容的真實性、準確性和合法性由發布會員負責。
